FAQ.

MULTI PURPOSE SYSTEM
"TASS - MPS" for
  1. WATER PROOFING
  2. ANTI CORROSION
  3. WALL CARE
  4. HEAT INSULATION
  5. CRACK FILLING / SEALING
  6. CEMENT PAINT ADDITIVE
  7. CONCRETE REPAIRS & MORE
ALL PROBLEMS SOLVED BY


01. What is “TASS-MPS”?

“TASS-MPS” is a two part system using world-wide accepted special chemical, based on acrylic emulsion alongwith an appropriate filler to solve the multiple construction problems like WATERPROOFING, CORROSION CONTROL, WALL CARE, HEAT INSULATION, CRACK-FILLING, ADDITIVE, CONCRETE/PLASTER REPARING ETC.

02. How “TASS-MPS” works in WATERPROOFING?

Leakages occurs mainly :

  • Due to honey combing in concrete
  • Due to high temperature variation &
  • Heavy rain fall
“TASS-MPS” attacks on all above reasons. “TASS-MPS” penetrates in porous & seals, forms complete waterproof barrier on the surface & reflects the heat & minimizes the temp.variation.

03. Comparatively there is less rain fall in Gujarat though the leakage problems occurs. Does “TASS-MPS” works ?

YES. “TASS-MPS” seals the honey combing & coating absorbs less heat thus minimizes temp.variation & works effectively.

04. Does “TASS-MPS” controls corrosion ?

YES it’s true.
Part A (liquid) coating applied on steel which controls corrosion.
Life of steel & building increases.

05. Can “TASS-MPS” be applied during monsoon ?

YES. “TASS-MPS” coating requires wet surface. It also requires less curing time. So one can use during monsoon.

07. Will the cracks re-open?

NO. Being the flexible material of “TASS-MPS” cracks will not open again. Acrylic part of “TASS-MPS” holds between new and old mortar/concrete very effectively.

08. Will “TASS-MPS” coating be effected in summer(heat)? i.e. high temp?

NO. “TASS-MPS” has a great flexibility & also reflects the heat. Not effected by U.V. rays. Further, coating becomes a part & parcel of the surface. This is the reason “TASS-MPS” works in INDIAN tropical weather condition.

09. How “TASS-MPS” works as a wall-care ?

Moisture penetrates inside the wall comes out & damage the painted walls.
“TASS-MPS” coating protects this moisture to come out. Paint coated over “TASS-MPS” gives excellent life.

10. Is “TASS-MPS” economical?

YES. “TASS-MPS” definitely economical & beneficial as well. “TASS-MPS” coating :

  • Seals the porous & increase life.
  • Due to less heat absorption reduces the use of cooling appliances.
  • Increases the life of coastly paints.
  • Protects corrosion.
  • Cost wise also very very economical.

11. Does “TASS-MPS” application need skill labour ?

Workmanship is very important. Application is easy but accuracy has great importance. Read instruction carefully & apply accordingly. YES, you can do it.

12. How “TASS-MPS” effectiveness could be checked?

Take two smooth polished stone like marble or kota stone. Put some drops of “TASS-MPS” part A on one surface. After 2 minutes put another stone over it. Let it dry for 3-4 hours. Now try to separate those stones. You will find the strength of the material.

Take two bricks. Apply one brick with “TASS-MPS” & leave for 6-8 hours. Now soak both pieces of bricks into water. Take them out and measure the weight of both the pieces. (untreated & “TASS-MPS” treated )

Result is in your hands !

J.SHAH TRADING CO. HAS MORE THEN 40+ YEARS OF EXPERIENCE IN WATERPROOFING.
STILL NEED ANY MORE PROOF ?